We manufacture tanks to store LPG, AMONIA and all similar products in above-ground tank versions with a capacity of 1 to 50 cubic meters. We are able to produce in the capacity and standards specially requested by the customers. We are a company that has the capability, skills and experience to produce tanks according to German, British, American and European standards.
The equipment using tanks are installed with standard valves of REGO / SRG / OMECA manufacturers or valves specially requested by customers.
Capacities | 1 - 50 m3 |
Outer diameters | Standard D 1000/1200/1750/2450mm. |
Operating pressure | 15-22 bar (other pressure avaliabel) |
Test Pressure | 26,5 bar |
Working Temperature | Min-40 , max +70 |
Products to be stored | UN 1978 Propan UN 1011-Bütan UN1075-Fuel-Oil D-Gas, Sıvılaştırılmış NH3(Amonia) |
Standard | ASME Div1-2-ASME U or U2 Stamps, EN 12542, EN13445/PED,BS5500,CODAP, AD2000-Merkblatt, CE Marka, GOST |
Tank Class | 2.Class (Gases) |
Regulation | European Pressure Equipment Directive 97/23 / EC, modules B / G + D compliance |
• Dizayn perform analyzes at the standards required by the Engineers using programs accepted in Europe and the world.
• Production is produced by taking into account the reports of engineers' calculations.
• In our tanks, special high strength, fine grained, normalized "P" series pressure vessel steel is used in accordance with EN 10028-3. The mechanical and metallurgical properties of steel are tested and verified.
• Elliptical dome is produced according to the standards and then it is mounted on the tank by relieving the stress.
• Welding is done by EN ISO 3834-2 certified welders in accordance with the standards and materials.
• It is carried out by certified NDT personnel who have competence and international competence in the testing and control of all welded connections. These tests are carried out by a third organization.
• Without painting the outer surfaces of the tank, sandblasted with a CNC automatic sandblasting machine in a very short time with SA 2.5 quality.
• Hydrostatic Test, All tanks are subjected to hydrostatic pressure test after manufacturing. During the hydrostatic test, the test is carried out after the purified water and water temperature are determined according to the standards. Connections of tank accessories are tested for air tightness. Hydrostatic test is checked and approved by a third company.
• Offers the best product to customers by using corrosion resistant, long-lasting, high quality two-component paint products of paint companies that have proven themselves in painting at an international level.